Distributed IO Systems Built To Last Outside Of The Control Panel
In certain application scenarios it isn't always cost-effective to house I/O systems within control panels but these components must be capable of withstanding strenuous conditions.
The SIMATIC ET 200 I/O systems with the high degree of protection IP65/67, including ET 200AL & ET 200eco PN, are small, rugged, and powerful enough to take on harsh industrial environments, directly at the machine.
ET 200 systems enable a multitude of functions to be covered. Both digital and analog input and output modules are available. With ET 200AL, communication can also be connected via IO Link.
And most importantly, all non-safety I/O modules within both the ET 200AL & ET 200eco PN range has recently been subject to a price reduction, making these systems even more cost-efficient.
SIMATIC ET 200eco PN
Browse all components within this compact block I/O system built for direct machine mounting
A Compact Block IO System Built For Extreme Environments
The SIMATIC ET 200eco PN offers you a particularly rugged block I/O solution with PROFINET connection in IP65/67 and IP69K.
Due to its fully-sealed zinc die-cast housing, the ET 200eco PN is mechanically tough and resistant to vibrations, dust, oil or humidity, and thus also suitable for use outdoors, even in challenging environmental conditions and temperatures from -40° to +60°C.
Thanks to the practical housing form, the devices can be mounted head-on or rotated 90 degrees to the side so that you can make optimum use of your installation space.
In fact, this highly flexible IO system is ATEX rated, meaning that ET 200eco PN IO stations can also be used in hazardous areas up to zone 2.
MAKE THE SWITCH TO SIMATIC ET 200AL
The rugged I/O system for effortless mounting anywhere
Purpose built IO System for distributed control electronics in confined spaces
You will likely struggle to find a more compact & low weight IO system that has been designed to for distributed control electronics in confined spaces and applications involving motion.
All SIMATIC ET 200AL modules are very robust and are a perfect choice for moving applications with 5 g (continuously) and a maximum of 10 g.
Its IP65/67 degree of protection ensures the modules are splash and dustproof, resistant to vibrations, as well as oil-tight. In fact, all modules are suitable for use at temperatures between –25 and +55 degrees Celsius.
Its extensive IO quantity structure with modules widths of 30 or 45 mm and up to 32 modules per station.
Standardised Engineering
The standardised engineering with the TIA Portal permits consistent system diagnostics and efficient operation. In addition, fast and convenient configuration
and commissioning can also be achieved via the TIA Portal with CAx-compliant labeling of all interfaces.
Fail-safe Group Shutdown
Actuators can be shut down in groups on a safety-related basis in accordance with performance level d via the outputs of the SIMATIC ET 200AL modules. The required performance level is determined or assigned as part of the risk assessment according to EN ISO 13849-1.
IO-Link Communication
With IO-Link V1.1 you can transfer current device & master parameters automatically to the IO-Link device – no additional engineering is required. The versatile IO-Link Master features adjustable parameters, diagnostic functions, and can be easily adapted as and when required.