Fortress Safety Remlive

Electrical Safety Warning Indicators

Remlive electrical safety warning indicators have been keeping the workplace safe for more than 25 years by providing a visual reminder on the front of the control panel that a circuit is live.

Faulty rotary isolators are a commonly found fault with up to 25% worn or damaged in service. This can inevitably result in a panel being powered up when the isolator appears to have been turned off.

Remlive clearly displays to your operators a live/isolation state on the control panel door, helping to reduce the risk of accidental electrocution.

Remlive electrical warning indicators are a perfect way to enhance your electrical isolation processes and strengthen your Lockout - Tagout (LOTO) procedures.

Why Choose REMLIVE?

Easy method of proof of isolation to enhance lockout/tagout procedures

Broad range of voltages (24-1000 VAC or VDC)

Bright, flashing LEDs display live/isolation status

Simple way to monitor correct 3 phase rotation

Extensive global certifications, including up to OVC IV

Simple installation with minimal maintenance required

REMLIVE RL-24i Isolator Check

The RL-24i Voltage Indicator provides operators with a positive check isolating plant. It offers electrical isolation between the DIN rail unit and the door mounted display device to ensure maximum safety for the operator. The indicator display is built to fit through the front of a control panel or switch so the user can see a clear live/isolation status.

BUY NOW

REMLIVE RL-24i Phase Indicator

The RL-24i Phase Indicator provides a simple way to monitor 3 phase supplies, up to 1000 VAC. The display unit provides users with an indication of each phase and the correct phase sequence or failure(s). Two versions of the RL-24i Phase Indicator are available – the display unit will indicate either Clockwise Correct or Anti-Clockwise Correct.

BUY NOW